• Articles |
  • Billable hour targets per day

Billable hour targets per day: what 1,800, 2,000 and 2,700 hours a year take

A target of 2,000 billable hours a year requires about 8.7 billable hours per working day across 230 working days. This example uses the 2026 US calendar, minus 11 federal holidays, three weeks of vacation and five sick days. If 75% of your time at work is billable, you need about 11.6 hours at work a day. On the same assumptions, 1,800 hours requires 7.8 billable hours and 10.4 hours at work per day; 2,700 requires 11.7 billable hours and 15.7 hours at work.

A woman in a blazer adds a stone to a cairn on a winding mountain trail lined with cairns, leading to a summit flag reading 2,000

How many working days are in a billable year?

This example uses 230 working days: 261 weekdays in 2026, less 11 US federal holidays, 15 vacation days and 5 sick or personal days. Adjust those allowances to your own calendar before dividing your annual target.

Step Days What it assumes
Weekdays in 2026 261 52 weeks plus one extra Thursday
Minus 11 public holidays 250 The 11 US federal holidays on OPM's 2026 schedule, all on weekdays
Minus 15 vacation days 235 Three weeks, the same allowance Yale Law School's career office uses in its billable hour model
Minus 5 sick or personal days 230 An assumption; Yale's model assumes none

Your firm may close for fewer holidays, or you may take less vacation than you are given. Both raise the number of working days and lower the daily figure. Long trials, parental leave and a slow first month all do the opposite. The point of doing it this way is that the time off is visible, rather than quietly assumed to be zero.

How many billable hours per day is 1,800, 2,000 or 2,700 a year?

Across 230 working days, annual targets of 1,800, 2,000 and 2,700 require 7.8, 8.7 and 11.7 billable hours per day respectively. Divide the annual target by 230 for the daily figure or by 46 working weeks for the weekly figure.

To find hours at work, divide daily billable hours by your recording rate, the share of time at work recorded as billable. The table uses 75%, the rate in Yale Law School's model: 10 hours at work produce 7.5 billable hours.

Billable hours a year Per month Per working week Per working day Hours at work a day, at 75% Hours at work a week, at 75%
1,800 150 39.1 7.8 10.4 52.2
2,000 166.7 43.5 8.7 11.6 58.0
2,700 225 58.7 11.7 15.7 78.3

At 2,000 hours, the daily target alone exceeds an eight-hour day of client work. Add lunch, email and the firm's own meetings, and it is close to a 7:30 to 7:00 day, five days a week, for 46 weeks.

If your recording rate is lower than 75%, the hours at work climb quickly:

  • At 70%: 11.2 hours a day for 1,800, 12.4 for 2,000 and 16.8 for 2,700.
  • At 65%: 12.0 hours a day for 1,800, 13.4 for 2,000 and 18.1 for 2,700.

Why does dividing by 365 or by 52 weeks understate it?

Dividing by 365 includes weekends and days off; dividing by 52 weeks leaves no weeks off. Both understate the daily requirement if you plan to take holidays, vacation or sick leave.

  • Every day of the year: 2,700 divided by 365 is 7.4 a day. One reply in a lawyers' forum thread used exactly this figure, and the next reply pointed out that it means working weekends, holidays and vacations too.
  • 52 weeks, no time off: 2,000 divided by 52 weeks and 5 days is 7.7 a day. This is the "it is just a normal full-time year" figure, and it assumes you never take a day off.
  • Holidays only: 2,000 divided by 250 days is 8.0. Closer, but still assumes no vacation and no illness.
  • Holidays, vacation and sick days: 2,000 divided by 230 is 8.7, the figure in the table above.

The difference between 7.7 and 8.7 looks small on a page. Over 230 days it is 230 hours, almost six working weeks. When a firm says its target is "just a normal working year", this is the gap to ask about.

How many hours at work does it take to bill 2,000?

About 11.6 hours a day across 230 working days at a 75% recording rate, or 2,667 hours at work over the year. The remaining time includes non-billable work, lunch and breaks.

Yale Law School's Career Development Office spells this out in its paper on the billable hour. Its model starts with a day at work from 8:00 to 6:00, then takes out an hour for lunch, half an hour of breaks, half an hour of legal updates and general correspondence, and half an hour of meetings, conferences and continuing education. That leaves 7.5 billable hours from 10 at work. Over 47 weeks, with three weeks of vacation, two weeks of holidays and no sick days, it comes to 1,762 billable hours, short of 1,800. Adding 1.5 billable hours a week, which the paper rounds to about 20 minutes a day, gets it to 1,832 billable hours, for 2,420 hours at work.

The same paper says firms' stated targets typically range between 1,700 and 2,300. Its 2,200-hour model needs a 12-hour weekday plus two or three working Saturdays a month, and 3,058 hours at work.

A 75% recording rate assumes a full workload. If the work is not there, the rate drops whatever hours you keep. Clio's benchmarks from its Legal Trends Report, drawn from tens of thousands of firms, put the average at about 3.4 billable hours recorded in an eight-hour day, a 42% utilization rate. Over 230 working days that is 782 hours.

That average is not an associate's target. It shows why a firm setting a target of 1,800 or 2,000 hours also needs to supply enough billable work. For the calculation outside law, see measuring billable utilization.

Does the target count recorded, billed or collected hours?

A recorded-hours target counts the billable time you log. A billed-hours target counts what reaches the client's invoice after write-downs; a collected-hours target counts what the client pays for. Realization does not change a recorded-hours target, but write-downs and unpaid invoices mean you must record more hours to meet a billed or collected target.

Clio puts the average realization rate at 90%, meaning about 90% of recorded billable work ends up on an invoice, and the collection rate at 92% of what is invoiced. Here is what a billed-hours target looks like at 90% realization:

  • 1,800 billed: 2,000 recorded, 8.7 per working day, 11.6 hours at work at 75%.
  • 2,000 billed: 2,222 recorded, 9.7 per working day, 12.9 hours at work.
  • 2,700 billed: 3,000 recorded, 13.0 per working day, 17.4 hours at work.

So a 1,800 billed-hours target is, in practice, the same day as a 2,000 recorded-hours target. When you compare offers or read your own firm's policy, find out which of the three numbers the target uses, and whether partner write-downs on your time count against you.

Rounding works the other way. If your firm bills in tenths of an hour and rounds each entry up, a day of short tasks records more time than was worked. The 6-minute billing chart shows how much a day's entries move under each rounding rule.

Is 2,700 billable hours a year realistic?

Not as honest hours on a normal schedule. 2,700 is 11.7 billable hours on each of 230 working days, or about 15.7 hours at work at a 75% recording rate. Spread over six days a week instead of five, it is still around 13 hours at work a day.

A thread on a lawyers' forum about an offer with exactly this minimum, 225 hours a month at a mid-sized insurance defense firm, drew about 300 replies, nearly all of them telling the new associate to walk away. One lawyer said they had billed over 2,400 a couple of times, during years with lots of trials, and called it a good way to take years off your life. Another called 2,700 a 70-hour week, every week. The associate rejected the offer.

A few replies raised the explanation that matters before you do any arithmetic. In some insurance defense and workers' compensation work, clients pay set amounts per task or per page, recorded as "hours" that are not clock time, so the billed figure can run well ahead of the hours worked. If an offer carries a target that looks impossible, ask how hours are counted, what happens in a month below the minimum, and where the bonus starts. The arithmetic on this page assumes recorded hours are hours worked.

Is 1,800 billable hours a year a reasonable target?

For a full-time lawyer with steady work, 1,800 is a reasonable but demanding target. Across 230 working days at a 75% recording rate, it requires 7.8 billable hours and about 10.4 hours at work per day, or 52 hours a week. It sits near the low end of the range Yale's career office describes.

In the same forum thread, replies about the lower targets varied as much as the practices behind them. One lawyer said they had a tough time hitting 1,850. Another said 1,700 is tough to meet in family law, where clients pay their own bills, while a third said a 2,000 requirement was relatively easy over a five-day week. One commenter said most first-year associates are expected to bill about 150 hours a month, which is 1,800 a year.

The difference between those answers is mostly how much billable work arrives and how much of the day goes to things nobody pays for. That is the part you can measure.

How do you know if you are on pace halfway through the year?

Divide the hours still needed by the working days still left. Here is a sample associate with a 2,000-hour target at the end of June 2026, who has recorded 930 billable hours so far.

  • Working days so far: 129 weekdays from January to June, minus 5 federal holidays, 5 vacation days and 2 sick days, leaves 117.
  • Where the pace says you should be: 117 days at 8.7 hours is about 1,017 hours. At 930, the associate is about 87 hours behind.
  • What is left: 1,070 hours over the remaining 113 working days, which is 9.5 billable hours a day.
  • What that means at work: at a 75% recording rate, 12.6 hours a day for the rest of the year.

Spread over the second half, the 87-hour gap adds about 45 minutes of billable time to every working day, and an hour of time at work. A monthly pace check gives you time to address the shortfall before December.

How do you find your own recording rate?

Track every hour for two to four ordinary weeks, billable and not, then divide the billable hours by the total. Use that figure instead of the 75% in the table, and the daily numbers become yours rather than an assumption.

  1. Mark each entry: client work as billable; admin, internal meetings, training and business development as non-billable. Do not skip the non-billable entries; they are the whole point.
  2. Review the period: one report shows total, billable and non-billable hours side by side.
  3. Divide: billable hours divided by total hours is your recording rate. If you only tracked part of your day at work, the real rate is lower still.
  4. Repeat monthly: compare billable hours to date with the pace your annual target requires.

Timen is free for a solo lawyer or a whole firm, with unlimited users. Every entry has a billable switch, a client and a project. The summary report shows total, billable and non-billable hours for any date range, plus the average per day.

That average divides the hours in the report by the days with at least one entry in it, so a working day with nothing logged does not count. Filter the report to billable time and it shows billable hours per day with billable entries; to compare with a target per working day, divide the billable total by your working days instead. Group by person to see each lawyer's figures.

Timen summary report showing total, billable and non-billable hours and average daily hours for a month, with hours grouped by project

Timen has no target or goal setting and no alert when someone falls behind pace, so calculate the pace from the report yourself. It records time actually worked and does not round to tenths. It has no LEDES export, UTBMS codes or trust accounting.

See how tracking client legal work fits a practice, or calculate billable amounts from a week of client hours.

Common questions about daily billable targets

How many billable hours a day is 2,000 a year?
A 2,000-hour annual target requires about 8.7 billable hours per working day across 230 working days: 261 weekdays in 2026, minus 11 federal holidays, 15 vacation days and 5 sick days. With no time off, it would be 7.7 billable hours per weekday.
How many hours do you have to work to bill 2,000 hours?
Recording 2,000 billable hours requires about 11.6 hours at work per day across 230 working days if 75% of your time is billable. That is 58 hours a week over 46 working weeks. At 65%, it requires 13.4 hours at work per day.
Is 1,800 billable hours a year a lot?
It is a full-time target, not a light one: 7.8 billable hours per working day, or about 10.4 hours at work at a 75% recording rate. Yale Law School's career office puts most firms' stated targets between 1,700 and 2,300.
Do billable hour targets count weekends?
An annual billable-hour target can include hours worked on weekends. If you cannot meet it during weekday working hours, the shortfall moves to evenings or weekends. Calculate the daily requirement using the days you actually plan to work.
Does realization affect a billable hour target?
Realization affects a target only if the firm counts billed or collected hours instead of recorded hours. At a 90% realization rate, billing 2,000 hours means recording about 2,222, or 9.7 hours per working day across 230 working days.

What should you do with your target?

Before accepting a target, confirm whether it counts recorded, billed or collected hours. Divide it by your available working days, then use your recording rate to calculate the time at work. If you cannot sustain that schedule for 46 weeks, raise it before you sign or before the year starts.

Track every hour for a few weeks to establish your recording rate, then calculate your pace once a month from those records. Timen provides the tracking for free; you calculate the target and pace yourself.